Tuesday 13 April 2010

Chimney Inspections

The inspection of single flue industrial chimneys is regulated by the HSE document GS53 and the ATLAS guidance booklet that builds upon the HSE document GS53.

The self supporting single flue steel chimney has commonly been used for a period in excess of 35 years during which time many have seen a change over from serving coal to oil through to the modern day gas fired boilers. This change over in fuels has left its own legacy creating very corrosive environments, this coupled with the effects of the UK climate has led to a large number of this type of structures ultimately failing, hence the HSE Guidance Note GS 53 was published in 2001.

For multi flue industrial steel chimneys the inspection guidance issued for single flue steel chimneys does not apply, the inspection of a steel multi flue chimney i.e where the waste gases do not come into direct contact with the main supporting structure, is covered in Appendix A of BS 4076 :1989.

At present there is currently no inspection guidance for concrete or brick chimneys, however due to the harsh environments and processes related to their use it is prudent to regularly inspect concrete and brick chimneys to ensure they remain in a serviceable condition.

A chimney inspector must be able to prove competency and experience with a minimum preference of being industry qualified via the NVQ route.

Wednesday 7 April 2010

Work at Height Hierarchy of Risk

Via risk assessment the use of a mewp to facilitate access to structures should always be the access method of choice particuarly for the completion of surveys.

In the uk truck mounted MEWPS can provide access up to working heights upwards of 70 metres.

During a recent meeting between the hse and the steeplejack federation ATLAS the hse voiced their concerns into the mindset of the steeplejack industry in relation to risk assessments for working at height and our industries continued insistance to survey structures using traditional ladders as apose to MEWPS.

Wherever it is practicable to do so Churchills always look to employ MEWPS for completing surveys of structures up to 70 metres, unfortunetly industry as a whole needs educating in relation to the Work at Height Regs it is only then that the additional cost for the use of MEWPS will become broadly accepted.